Sectors
Where Our Analysis Applies
The areas below describe the types of facilities our engineering studies can be applied to. This page is not a client or reference list; for each area it shows which decisions are addressed by which studies.
Industrial plants
Shift- and process-driven load profiles, high peak demand and the protection scheme of MV/LV distribution boards are the determining factors.
Typical decision questions
- Can peak demand and demand charges be reduced through storage or load management?
- Do existing protection settings match short-circuit levels and selectivity requirements?
- What is the arc flash incident energy per board and the required PPE category?
Applicable studies
Organized industrial zones (OSB)
In a multi-user distribution structure, shared energy resources, connection limits and distribution-level protection coordination come to the fore.
Typical decision questions
- How technically and financially feasible are shared solar or storage scenarios?
- How are short-circuit levels and protection coordination at the connection point affected?
- How do self-consumption and procurement strategy take shape under hourly net metering?
Applicable studies
Solar + storage
Generation surplus, self-consumption ratio and the power quality impact of inverters are the determining factors.
Typical decision questions
- Should the solar surplus be absorbed by storage, and at what power and capacity?
- How does generation–consumption matching look in hourly and 15-minute data?
- How are fault current contribution and protection settings at the connection point affected?
Applicable studies
Commercial buildings
Tariff structure, daytime–evening load profile and the safety of main distribution boards come to the fore.
Typical decision questions
- Does the tariff and peak structure create a meaningful benefit space for storage or solar?
- Are the arc flash risk and protection scheme of the main distribution boards adequate?
- How should procurement options be compared against the consumption profile?
Applicable studies
Every facility is a separate study with its own load profile, grid connection and tariff. The questions above are example decision topics and do not imply any result.
Let's determine which study your facility needs
Share the facility type, size and your decision question; we will define the scope in a technical pre-assessment.
Request a Technical Pre-Assessment